Flat jet nozzle: High impact force
Flat jet nozzles are the most commonly used nozzle types, and can be found in almost every area of the manufacturing and processing industry. Flat jet nozzles produce a fan-shaped with different but essentially narrower spray widths. The exiting/outgoing liquid reaches the surface to be sprayed with a high impact force, so the main application of the flat jet nozzle is the washing or cleaning of parts or any washing process.
Due to the characteristics of the spray pattern of the flat jet nozzle, it is primarily a suitable choice for applications where either the surface / object to be sprayed or the nozzle is in motion.
The flat jet nozzle is auniversal nozzle type. Primarily suitable for transporting aqueous or other low viscosity media.
With this type of nozzle, you can choose from a very wide range, both in terms of volume flow and spray angle, as well as material quality and connection.
Depending on the specific application, the spray pattern of the flat jet nozzle can be elliptical and square shaped.
The elliptical spray cross-section flat jet nozzle is standard. This is most often the perfect choice for a variety of washing and surface applications. However, one of the main features of an elliptical spray pattern is that it produces a parabolic droplet distribution, so, much less medium reaches the two edges of the parabola than the core of the flat-jet nozzle spray pattern. This must be taken into account when installing the nozzles and the installation distance must be determined in such a way as to ensure adequate overlap of the spray patterns. (1 / 3-1 / 4 ratio)
However, there are cases where it is very important that the same amount of medium reaches each point of the nozzle spray pattern, in which case flat jet nozzles with a square or rectangular spray pattern are used.
Our products include the right flat jet nozzle for both low pressure and high pressure applications.
FIELDS OF APPLICATION
Parts washing, crate washing, vehicle washing, high pressure washing, sprinkling, phosphating, degreasing and rinsing during surface treatment, cylinder cooling, track lubrication, descaling, tank cooling, foaming.
Low pressure flat jet nozzle
MC2 – low capacity
Type: MC2 – low capacity
Features: Low capacity. 1/4″ male BSPT thread. Made of AISI 303, AISI 316 and brass.
Spray angle: 0°, 15°, 25°, 40°, 50°, 65°, 80°, 95°, 110°.
Flow rate:0,067 – 5,90 (l/min – 3bar)
MC3E – standard capacity
Type: MC3E – standard capacity
Features: Standard capacity. 1/8″, 1/4″, 3/8″ male BSPT thread. AISI 303, AISI 316 and brass materials.
Spray angle 0°, 15°, 25°, 40°, 50°, 65°, 80°, 95°, 110°.
Flow rate 1,20 – 59,50 (l/min – 3bar)
MC3 – high capacity
Type: MC3 – high capacity
Features:High capacity. 1/2″, 3/4″, 1″ male BSPT thread. AISI 303, AISI 316 and brass materials.
Sprayangle:0°, 15°, 25°, 40°, 50°, 65°, 80°, 95°, 110°.
Flowrate:up to 225 (l/min – 3 bar)
MC3T, MC3EE – six-valve nozzle
Type: MC3T, MC3EE – six-valve nozzle
Features:Even droplet distribution. 1/4″, 3/8″ and ½” male BSP or BSPT threads, short installation length, brass, SS303 and SS316L materials.
Spray angle: 0°, 15°, 25°, 40°, 50°, 65°, 80°, 95°, 110°
Flow rate: 1,20 – 79,00
C1 – nozzle forlocknut
Type: C1 – nozzle for nipple
Features:Even droplet distribution, standard and high capacity, tip construction, locknut attachment, brass, SS303 and SS316L material.
Sprayangle:0°, 15°, 25°, 40°, 50°, 65°, 80°, 95°, 110°
Flowrate: 0,067 – 27,00 (l/min – 3 bar)
KC1 – plastic nozzle for locknut
Type: KC1 – plastic nozzle for locknut
Features: Even droplet distribution, standard and high capacity, base construction, can be fixed with locknut, POM material quality.
Sprayangle 80°, 110°.
Flowrate 0,39 – 7,80 (l/min – 3 bar)
CRC1 – Flat spray dovetail noozle
Type: CRC1 – dovetail nozzle
Features:Even droplet distribution, dovetail construction, standard and high capacity, can be fixed with locknut and special accessories, brass, SS303 and SS316L materials.
Spray angle: 45°, 60°, 90°, 120°
Flow rate: 1,20 – 122,00 (l/min – 3 bar)
CD3 – spoon noozle wide spray angle
Type: CD3 – spoon nozzle wide spray angle
Features: spoon nozzle, wide spray angle, relatively even distribution. 1/8″ – 1″ male BSPT thread or locknut lockable tip construction, brass, SS303, SS316L materials.
Sprayangle: 90° – 150°
Flow rate:0,40 – 355,00 (l/min – 3 bar)
CD4 – spoon noozlewide spray angle
Type: CD4 – spoon nozzle narrow spray angle
Features: spoon nozzle, narrow spray angle = HIGH IMPACT POWER, medium droplet size. 1/8″ to 3/4″ male BSPT threaded connection, AISI 303, AISI 316L and brass.
Spray angle:15°, 25°, 35°, 40°, 50°
Flow rate: 4,00 – 78,00 (l/min – 3 bar)
High pressureflat jet nozzle
HPR, H500P, C4
Type: HPR, H500P, C4
Features: Even spraying, high impact force, for high pressure washing. 1/8″-1/4″ male BSPT thread or locknut connection
Spray angle:0°, 15°, 25°, 40°, 50°, 65°
Flow rate: 3,40- 136,00 (l/min – 100 bar)